Today is

By: Ikedi Ani-okoye.

Introduction to spark plugs

A platinum spark plug requires less maintenance compared to other types of sparkplugs. Some platinum plugs can last almost a hundred thousand miles because of this metal's unique properties.

A platinum spark plug needs to be gapped to the car manufacturer's specifications. However, use of sand paper should be avoided on a platinum spark plug, and if the plug becomes soiled, it will simply need to be replaced. This means that inspection of the spark plug at regular intervals is important.

Platinum spark plug news

According to some experts, the requirement for platinum spark plugs in the North American market is increasing, as these sparkplugs offer longer tune-up cycles and greater strength compared to traditional copper plugs. There are double platinum sparkplugs that offer greater durability but are costlier compared to copper sparkplugs.

Remember your spark plug

Spark plugs are small. Yet- the performance of your vehicle depends on them. Sometimes, people who are having car trouble- as in the car will not start- fear the worst. Yet, this could simply mean the spark plugs need to be changed. Keeping up with the routine maintenance on your car with things like changing spark plugs will keep your car running just fine, as well as get better gas mileage. Here are some tips on how to save yourself some cash by doing this simple task yourself.

The use of a spark plug

A spark plug is used in every type of gasoline engine. Many people change their own spark plugs. Spark plugs handle the ignition spark that combusts or ignites the engines fuel and moves the piston. Spark plugs have to endure very high temperatures from combustion. Spark plugs also have to handle the spark erosion from the ignition system.

CONCLUSION

Although the spark plug gap is different for different engines, most are gapped between .030" and .045". The spark plug gap spec should be located under the hood or on a sticker on recreational vehicles.

Use a feeler gauge to measure the plug gap, then tap the electrode closed or gently pry gap wider with a screw driver until the distance is reached. Tighten the spark plug snugly as the sealing washer will compress a little the first time. Always check the small top metal cap on a plug to see that it's screwed on tight.